Air Dryer For Plasma Cutter use air as the cooling medium, offering flexible installation and water-saving operation. As a result, they are the preferred and standard solution for most conventional industrial gas drying needs. These dryers are well-suited for applications with small to medium air volumes, where ventilation is adequate, ambient temperatures are moderate, or water resources are limited or inconvenient to access.
Product Specifications
| Model | BRA026F | Inlet/Outlet | G1 | |
|---|---|---|---|---|
| Capacity (Nm3/min) | 2.6 | Weight (kg) | 41.5 | |
| Voltage (V) | 220 | Dimensions (mm) | 680*440*740 | |
| Power (kW) | 0.55 |
Product Features
Easy maintenance
Routine maintenance mainly revolves around cleaning (dust removal) the air-cooled condenser and the refrigeration system. It involves a small workload and relatively low technical requirements.
Moderate initial investment
Although the cost per unit may be slightly higher than that of a water-cooled unit.But the overall initial investment is usually lower because no additional cooling water infrastructure is required.
Save water
It relies entirely on air for cooling and does not consume water resources. It gives a clear advantage in water-scarce areas or situations where water conservation is required.
Contact Us
Air Dryer For Plasma Cutter BRAF026 is the most cost-effective choice for the vast majority of conventional industrial applications.If you need this product or any similar ones, please contact us for the best quote. We also provide one-stop services for air energy, solutions, and accessories. Please feel free to contact us for any cooperation inquiries or further assistance.
And you can check more reference from our below social channels.
